MiTo (2008 onwards)

Kit contains 2 camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 12mm bolt. This fits 2 bolt hub to strut models only. Check bolt diameter. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit...

LOWER REAR ENGINE MOUNT INSERTPFF1-1120BLKFor 1.4 TJet 120hp, 1.4 MultiAir 135hp, 1.3 JTDM 5Spd, and 0.9 TwinAir models. For models with TCT gearbox, use PFF80-1120. This part is inserted into the original bush, to increase stiffness. If fitting this to...

PFF1-1130BLK Lower Engine Mount Insert is made in our hardest Black 95A durometer material for heavily tuned vehicles and track use for maximum strength and response. Designed to fill the voiding in the OE...

Please check anti roll bar diameter before ordering.

Please check anti check bar diameter before ordering.

Please check anti roll bar diameter before ordering.

Front Arm Front Bush PFF80-1101BLK

This bush is suitable for Road and Black Series applications. It is the same part as the Road Series but with Black series packaging. For Fiat/Alfa suspension arm C14771 - D14771 Vauxhall-Opel Part Numbers: 352864 and 13167940. Check more videos on our...

This part fits into and fills voids in engine mount OE numbers: 50510781, 5684 206 and 55703436. It does not fit 1.2, 1.3JTD, 1.4 8v or 1.4 16v engines. PFF80-1120 fits this type of mount only. Please check the picture below before ordering.

Rear Beam Mounting Bush PFR80-1110BLK