A1 8X (2010-)

Fits 2WD models only with a 69mm diameter bore rear beam. For vehicles with 72.5mm bore please use PFR85-415.

Fits 2WD models only with a 72.5mm diameter bore rear beam. For vehicles with 69mm bore please use PFR85-610.

PFF85-620 is suitable for petrol engined road models. For diesel engine models use PFF85-620R. Fitting engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional vibration may be felt.

Front Anti Roll Bar Bush 20mm PFF85-603-20BLK

Front Anti Roll Bar Bush 19mm PFF85-603-19BLK

Please check anti-roll bar diameter before ordering.

This part has been designed to give an extra 10mm of lowering when fitted as it allows the strut to sit higher into the body of the top mount. These new top mounts ship complete with new top cap spacers, made using our Black material - this additional...

Front Strut Top Mount Bush PFF85-430BLK

PFF85-201G gives +/- 0.5 degrees of camber adjustment. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment. For a...

If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a...

For the Skodia Fabia 5J, this bush only fits models with these chassis numbers: F5J 8A502 657 Onward, F5J 8B503 032 Onward, F5J 8K450 961 Onward, F5J 83172 974 Onward.