Mini Generation 1 (R50/52/53) (2000 - 2006)

PFR5-110BLK inserts will fit models up to 05/2003 with the OE trailing arm brackets 33326753973 and 33326753974. For a full replacement bush, please use PFR5-1105BLK

PFR5-1105 is a complete bush. It fits early Gen1 models up to 2003 with a diameter of 80mm, for later models with a diameter of 60mm use PFR5-1104. For inserts use PFR5-110 which fit into the original rubber bush.

PFR5-1104 is a complete bush. It fits later Gen1 models from 2003 onwards with a diameter of 60mm, for the earlier models with a diameter of 80mm use PFR5-1105. For inserts use PFR5-1102 which fit into the original rubber bush.

PFF5-132G adds an additional 1.25 of negative camber. These new ball joints brackets are made from high quality cast steel along with long life ball joints offering a direct replacement performance upgrade to the standard ball joint. The additional...

This part fits Mini Gen 1 models from 2004 to 2006.

This replaces the complete original bush in bracket, if you would like to fit an insert only then please use PFF5-107. The bush comes with an insert giving the option to stiffen the mount up by fitting the insert into the voids enabling you to change...

Gearbox Mounting Bush Insert PFF5-108BLK

This bush is an insert and fits into the original bush in bracket.

These Bushes fit Models Upto 2004, Models From 2004 Use An Oil Filled Upper Engine Mount And Dont Have A Upper Support Bracket. This bush is an insert and fits into the original bush, it does not replace the original bush.

These Bushes fit Models Upto 2004, Models From 2004 Use An Oil Filled Upper Engine Mount And Dont Have A Upper Support Bracket

Steering Rack Mount PFF5-103BLK

Please check anti roll bar diameter before ordering