86 / GT86 (2012 ON)

This bush is designed to replace the rear upper control arm front bush and is engineered to provide on car CAMBER adjustment with a range of +/- 1.0 degree, as well as being of a low compliance design. This bush must be used in conjunction with...

Rear Upper Arm Inner Front Bush PFR69-510

Rear Toe Adjuster Inner Bush PFR69-508

Kit contains 2 camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 14mm bolt. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber...

Allows on car camber adjustment +/- 1.0 degree

Allows on car adjustment of caster +/- 0,33 degrees, also has revised anti dive geometry.

Fits aftermarket 25mm anti roll bars including Eibach. Please check anti roll bar diameter before ordering. Size: 25mm

Front Anti Roll Bar Bush 18mm PFF69-803-18

Rear Trailing Arm Front Bush PFR69-810

Rear Trailing Arm Rear Bush PFR69-507

Rear Lower Track Control Inner Bush PFR69-509

This bush is designed to replace the rear upper control arm rear bush and is engineered to provide on car CAMBER adjustment with a range of +/- 1.0 degree, as well as being of a low compliance design. This bush must be used in conjunction with PFR69-510G.