Note / Tiida (2006 - 2011)

Rear Beam Mounting Bush PFR60-810

Front Arm Rear Bush PFF60-902

Front Arm Front Bush PFF60-901

This bush is half the length of the bracket and uses a spacer, for models with full bush with no spacer use PFF60-503-*.

This polyurethane insert fits into and fills voids in the original rubber bush. It is designed to limit movement of the engine and gearbox to provide additional stability under acceleration.

Kit contains 2 camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 14mm bolt. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber...

PFF60-902G provides a fixed 4mm offset to provide +/- 0.5° caster offset for improved steering feel. Additional caster will also create additional negative camber on turn giving improved tyre contact with the road under heavy cornering. For a...

PFF60-8025P is a further 20% stiffer than PFF60-8025 being made solely in our Purple 80A durometer material and is recommended for more heavily tuned road or occasional track cars. A small increase in NVH, usually at idle should be expected when...

PFF60-8025 is significantly stiffer than the OE mount and recommended for standard or mildly tuned road cars, using a combination of our Yellow 70A and Purple 80A durometer materials. A small increase in NVH, usually at idle should be expected when...