Cabriolet (1992 - 2000)

Available singularly to suit a specific vehicle or as a handy 4-piece workshop kit, our new PowerAlign Wheel Mounting Guide Pins are designed to allow the safer mounting and easy alignment of heavy alloy wheels on most common cars to use lug bolts. OEM...

Kit contains 2 camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 14mm bolt. Why not add our Magnetic Camber Gauge to your tool kit so that you can make pit garage adjustments to your suspension using PowerAlign Camber...

For Audi 80, 90 inc Avant it only its up to 1992 chassis number 8A-N-200-000, for later cars use PFR3-111.

Rear Panhard Rod Bush PFR3-109

This bush fits cast wishbones with 45mm bush. For pressed steel wishbones with 37mm bush, use PFF3-101.

This bush fits pressed steel front wishbones with 37mm bush. For cast wishbones with 45mm bush, fit PFF3-102.

Front Anti Roll Bar Mount 25mm PFF3-103-25

Front Anti Roll Bar Mount 24mm PFF3-103-24

Fits Models Up To 1992 Chassis Number 8A-N-200-000.

This bush fits Audi 80,90 inc Avant, Coupe, it fits up to 1994 chassis number 8B-L-003-791, after 1991 the anti roll bar may be linked to the shock absorber with a metal link so there will be no anti roll bar link. It fits Audi 80,90 Quattro and Coupe...

Check bolt diameter, this bush uses a 12mm bolt. For bushes which have a 10mm bolt use PFF3-120-10.

Check bolt diameter, this bush uses a 10mm bolt. For bushes which have a 12mm bolt use PFF3-120-12.