Caddy Mk2 Typ 9K (1997-2003)

This part replaces OE number: 6K9 501 541

PFF85-201G gives +/- 0.5 degrees of camber adjustment. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of camber adjustment. For a...

If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a...

If fitting this bush to Corrado (89-95), it only fits VR6 models. For non VR6 models use PFF85-203.

Front Anti Roll Bar Bush 20mm PFF85-205-20

Front Anti Roll Bar Mount PFF85-205

PFF85-208 is suitable for links with a 12mm diameter shaft with a 19mm nut. For 10mm shafts use PFF85-208-10. Not Suitable For VR6 - Models and GT Models with chassis codes AAA, AGG & AKR (VW Vento).

Bushes fit eye bolt mounting either side of where it passes through the wishbone. PFF85-208-10 is suitable for links with a 10mm diameter shaft which uses an M8 nut to hold the bushes in position.

Fits both 20mm and 22mm diameter bars

Front Anti Roll Bar Eye Bolt Bush 18mm PFF85-209

Front Cross Member Mounting Bush PFF85-250

This bush is suitable for vehicles with 15mm wide bracket and has an inner diameter of 44mm. For brackets 18.5mm wide, use PFF85-232