Focus Mk1 RS

Please measure bar and select correct size.

This bush fits RS and ST models only and measures 62mm diameter. For non RS models use PFF19-802, which measures 57.1mm diameter.

PFR19-812 provides stability to the rear trailing arm whilst allowing the knurled pattern bush to freely rotate in the supplied outer shell. This part replaces OE numbers: 1061670, C2Y6-28-46X, 1304124, 30666821 and BV615K896AB.

Rear Lower Control Arm Bush PFR19-811BLK

Rear Track Control Arm Inner Bush PFR19-808BLK

Rear Track Control Arm Outer Bush PFR19-807BLK

Front Anti Roll Bar Mounting Bush PFF19-804BLK

PFF19-810G is an on-car adjustable version of our popular PFR19-810 bush and is designed to provide +/- 1 degree of camber adjustment. This part replaces OE numbers: 1061659, 1136072, 1329730, 1448127, 1517403, 1M515500AC, 1M515500BA, 31201356, 31212503,...

This part replaces OE numbers: 1061659, 1136072, 1329730, 1448127, 1517403, 1M515500AC, 1M515500BA, 31201356, 31212503, 31277305, 6M515500BA, 8671921, 8M515500AA, 8M515500AB, 98AG5500AG, 98AG5500BF, 98AGG5K653DA, BBM228C10, BP4K28C10B.

PFF19-8011GBLK is a replacement bush that is 15% stiffer than the original bush and provides +/- 0.5 degrees of on-car camber adjustment. Suitable for 14mm bolt, if your vehicle uses a 12mm bolt please order PFF19-801GBLK.

PFF19-8011BLK is a replacement bush that is 15% stiffer than the original bush. For a camber adjustable version of this bush please use PFF19-8011GBLK. Suitable for 14mm bolt, if your vehicle uses a 12mm bolt please order PFF19-801.