Powerflex Black Series

This bush is designed specifically to fit pattern arms. For genuine OE arms please use PFF85-410BLK.

Front Wishbone Rear Bush PFF85-502BLK

For a caster offset version of this bush please use PFF85-602GBLK.

Fits Pressed Steel And Cast Wishbones, Has Been Designed For Motorsport Use, It Is A Rose Joint Type Bush. This bush is suitable for Road and Black Series applications. It is the same part as the...

Ford have changed the diameter of the bushes used in the front wishbones several times. Please measure the original bushes to select the correct bushes. PFF19-601 is 46mm diameter. PFF19-602 is 54mm...

This part provides +/- 0.33 degrees of on-car caster adjustment combined with an additional 6mm anti-lift offset. This bush is designed for use on standard travel suspension.

PFF69-505G is designed to replace the front lower control arm rear bush and is engineered to provide:-1. revised front ANTI-LIFT geometry2. on-car CASTER adjustment giving +/-0.33 degrees of...

PFF69-902G is designed to replace the front lower control arm rear bush and is engineered to provide. 1. Revised front ANTI-LIFT geometry 2. On-car CASTER adjustment giving +/-0.33 degrees of...

PFF19-1802GBLK is is a CNC machined aluminium mount and polyurethane bush to provide 1 degree of positive caster offset and 7.5mm anti-lift properties. Focus ST and RS owners are all too familiar...

This polyurethane bush fits into the rear position of the front arm and provides anti-lift properties and 1 of caster offset. It is designed to complement PFF85-501G that fits into the front position...

This polyurethane bush fits into the rear position of the front arm and provides anti-lift properties and 1 of caster offset. It is designed to complement PFF85-501G that fits into the front position...

PFF1-1002G is a replacment bush that in our Black Series material is 168% stiffer than the original rubber bush for Track/Competition use and gives a fixed 5mm offset to provide +/- 0.5 caster offset...