Powerflex

Rear Diff To Cross Member Bush PFR36-311

Rear Engine Mount Bush Insert PFF73-304

This bush is made in a harder material and is intended for Motorsport Use

This bush is an insert and to be used with the original rubber bush. It fits Type R and Si models only.

This bush only fits European Sport models. This is an insert and fits into the voids of the original bush, it does not replace the complete bush. PFF73-420 fits into the voiding of the original bush,...

EXH030 is designed to replace the internal rubber bush that can so often become unattached from the bracket.

This bush measuers 64mm. For a 74mm diameter bush, use PFF76-423.

Fits models supplied from Toyota with a Limited Slip Differential (LSD) fitted from the factory. For non LSD models use PFF76-421.

Rear Inner Bar Link Bush PFR76-105

PFR76-305 fits Rev 1&2 models 1989 to 1992 and uses a M14 bolt. For Rev 3 models 1993 to 2000 use PFR76-305-12 which uses an M12 bolt.

For 35mm bush, use PFR42-611

PFR76-305-12 fits Rev 3 models 1993 to 2000 which uses an M12 bolt. For Rev 1&2 models 1989 to 1992, using an M14 bolt use bush PFR76-305.