Powerflex

Front Radius Arm To Chassis Bush PFF5-701

Front Track Control Arm Inner Bush PFF73-201

This bush fits pressed steel front wishbones with 37mm bush. For cast wishbones with 45mm bush, fit PFF3-102.

This bush fits cast wishbones with 45mm bush. For pressed steel wishbones with 37mm bush, use PFF3-101.

PFF1-1001 is a replacement bush that is 11% stiffer than the original rubber bush. For a camber adjustable version of this bush please use PFF1-1001G.

Front Wishbone Front Bush PFF44-501

Please measure the OE bush to select the correct bushes. PFF19-601 is 46mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47mm diameter. Please note these bushes will not fit the ST24 or ST200...

Please measure the OE bush to select the correct bushes. PFF19-601 is 46mm diameter, PFF19-602 is 54mm diameter and PFF19-901 is 47mm diameter.

PFF85-201G gives +/- 0.5 degrees of camber adjustment. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied),...

PFF19-8011G is a replacement bush that is 15% stiffer than the original bush and provides +/- 0.5 degrees of on-car camber adjustment. Suitable for 14mm bolt, if your vehicle uses a 12mm bolt please...

PFF1-1001G is a replacement bush that is 11% stiffer than the original rubber bush and provides +/- 0.5 of on-car camber adjustment. For a non-adjustable version of this bush please use PFF1-1001.

This bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of on-car camber adjustment.