Saloon (1996 - 2005)

Please check anti roll bar diameter before ordering.

PFF32-108G-25 has been engineered to provide caster correction for vehicles that have been lifted or lowered by 50mm. This part suits wider 44mm arms fitted on models chassis number LA onwards. Correcting the caster on your vehicle will provide:Greater...

PFF32-108G-25 has been engineered to provide caster correction for vehicles that have been lifted or lowered by 25mm. This part suits wider 44mm arms fitted on models chassis number LA onwards. Correcting the caster on your vehicle will provide:Greater...

This part suits vehicles with the wider 44mm radius arms. For vehicles with 38mm radius arms please use PFF32-107. PFF32-108 uses our Black 95A material which helps to increase the stiffness of the original parts by over 30%. It is manufactured in two...

PFF32-109G is designed to counter pull to the left or right by correcting the steering using our offset bushes. The kit includes parts to correct steering geometry by 0.5 and 1 degrees. The kit includes replacement washers and Nyloc nuts for a clean...

PFF32-109 replicates original steering geometry.Made from our Yellow 70A material, this part allows the required articulation that this bush location demands.To counter pull to the left or right, please use PFF32-109G05 for 0.5 degrees offset or...

PFF32-107G-50 has been engineered to provide caster correction for vehicles fitted with a 50mm lift kit. This part suits narrower 38mm arms fitted on models up to chassis number KA. PFF32-107G-25 has been engineered to provide caster correction for...

PFF32-107G-25 has been engineered to provide caster correction for vehicles fitted with a 25mm lift kit. This part suits narrower 38mm arms fitted on models up to chassis number KA. PFF32-107G-25 has been engineered to provide caster correction for...

This part suits vehicles with the narrower 38mm width radius arm. For vehicles with 44mm width radius arms please use PFF32-108. PFF32-107 uses our Black 95A material which helps to increase the stiffness of the original parts by over 30%. It is...

This part fits vehicles with aftermarket anti roll bars measuring 28mm diameter. Please check anti roll bar diameter before ordering.

This part fits vehicles up to VIN 2A626645. For later vehicles please use PFF32-301.

Rear Beam Mount Bush PFR3-215