Toledo MK1 1L (1992 - 1999)

Rear Beam Mounting Bush PFR85-207

Universal Exhaust Mount EXH007

Fits Pressed Steel And Cast Wishbones, Has Been Designed For Motorsport Use, It Is A Rose Joint Type Bush. This bush is suitable for Road and Black Series applications. It is the same part as the Road Series but with Black Series packaging

Kit contains 2 x 12.9 Steel camber bolts, tab washers and nuts. Camber adjusting bolt to replace the original 12mm bolt. This fits 2 bolt hub to strut models only. Check bolt diameter. Size: 12mm

PFF85-201G gives +/- 0.5 degrees of camber adjustment. PFF85-201G bush features a CNC machined Stainless Steel sleeve with an offset bore that can be rotated using our bespoke tooling (supplied), giving +/- 0.5 degrees of camber adjustment. For a...

If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a...

Front Wishbone Rear Bush PFF85-203

Front Anti Roll Bar Bush 20mm PFF85-205-20

Front Anti Roll Bar Mount PFF85-205

PFF85-208 is suitable for links with a 12mm diameter shaft with a 19mm nut. For 10mm shafts use PFF85-208-10. Not Suitable For VR6 - Models and GT Models with chassis codes AAA, AGG & AKR (VW Vento).

Bushes fit eye bolt mounting either side of where it passes through the wishbone. PFF85-208-10 is suitable for links with a 10mm diameter shaft which uses an M8 nut to hold the bushes in position.

Fits both 20mm and 22mm diameter bars