TOLEDO MK4 NH (2012-2018)

Fits 2WD models only with a 69mm diameter bore rear beam. For vehicles with 72.5mm bore please use PFR85-415.

PFF85-620R is suitable for diesel engine models. For petrol engine models use PFF85-620 and for track/tuned models use PFF85-620P. Fitting engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional...

PFF85-620P is suitable for track car/tuned models, it is a stiffer bush and may give more vibration. For diesel engine models use PFF85-620R. For petrol engine road models use PFF85-620. Fitting engine mount bush to 1.4 TDI 3 cylinders is not advisable...

PFF85-620 is suitable for petrol engined road models. For track/tuned models use PFF85-620P. For diesel engine models use PFF85-620R. Fitting engine mount bush to 1.4 TDI 3 cylinders is not advisable. Please note these are an upgrade, some additional...

Please check anti-roll bar diameter before ordering.

This part has been designed to give an extra 10mm of lowering when fitted as it allows the strut to sit higher into the body of the top mount. These new top mounts ship complete with new top cap spacers, made using our Black material - this additional...

Front Strut Top Mount Bush PFF85-430

For the Skodia Fabia 5J, this bush only fits models with these chassis numbers: F5J 8A502 657 Onward, F5J 8B503 032 Onward, F5J 8K450 961 Onward, F5J 83172 974 Onward.

Universal Exhaust Mount EXH023

If fitting on Audi TT MK1, S3 and A3 MK1 and Seat Leon & Cupra MK1 it fits earlier models with a 30mm diameter. It fits both the pressed and cast arms on the Leon & Cupra MK1 and A3 MK1 2WD. Please check original bush size. Later cars may use a...

The OE rubber steering rack mounting bush that secures the rack position is one of those that commonly softens causing vague steering often followed by a pulling feeling on the road, and a less than enjoyable driving experience. PFF85-633 Steering...